Homebrew: Convenient Water Filtration System

I provide a quick overview of my homebrew water filtration and distribution system I designed. The system is made up of 1/2″ PVC, PVC ball valves, garden hose quick disconnects, whole house water filters and a cam fitting. Below I have provided links to items similar to what I have in my setup. Please make sure if you are going to substitute any PVC items you’ll need to make sure the product is schedule 40 and not furniture grade PVC.

Links to items you’ll need:
1/2″ PVC Ball Valves (3 Total): http://amzn.to/1T2CzT3
Water Filter Housings (2 Total): http://amzn.to/1saMufQ
5 Micron Filter (1 Total): http://amzn.to/1WmeSHE
0.5 Micron Filter (1 Total): http://amzn.to/1saNikN
90 Degree 1/2″ PVC Fittings (3 Total):
1/2″ Pipe to 3/4″ Female Hose Fitting (1 Total): http://amzn.to/1TzeXBV
1/2″ Pipe to 3/4″ Male Hose Fitting (1 Total): http://amzn.to/1WmgC3z
1/2″ PVC Tee (1 Total): http://amzn.to/1Tzfa86
1/2″ PVC to 1/2″ thread (1 Total): http://amzn.to/1rRl7qa
1/2″ PVC to 3/4″ NPT adapter (4 Total): http://goo.gl/xCa7sS
1/2″ Camlock Fitting (1 Total): http://amzn.to/1T2CGOu
Garden Hose Quick Disconnects (3 Pairs): http://amzn.to/1Tzhfki
Pipe Straps (As many as needed): http://amzn.to/1VS6qjx
1/2″ PVC Pipe (As much as required to fit your area):
PVC Cement: http://amzn.to/1Tzhs73
Garden Hose on/off valve: http://amzn.to/1VS7nby

I also suggest purchasing a set of PVC pipe cutters like these to help make the job easier and have straight cuts: http://amzn.to/1saTh9j

Please Subscribe!